Engine: Boost.Regex

^Home ^| ^Engines ^| ^Reference ^| ^{Improve this section}

Languages

^{Improve this section}

Features

The following features are supported:

✔ Flags
✔ Anchors
✔ Buffer Boundaries
✔ Word Boundaries
✔ Continuation Escape
✔ Alternatives
✔ Wildcard
✔ Character Classes
✔ Posix Character Classes
✔ Collating Elements
✔ Equivalence Classes
✔ Character Class Escapes
✔ Line Endings Escape
✔ Character Property Escapes
✔ Quoted Characters
✔ Quantifiers
✔ Lazy Quantifiers
✔ Possessive Quantifiers
✔ Capturing Groups
✔ Named Capturing Groups
✔ Non-Capturing Groups
✔ Backreferences
✔ Comments
✔ Modifiers
✔ Branch Reset
✔ Lookahead
✔ Lookbehind
✔ Non-Backtracking Expressions
✔ Recursion
✔ Conditional Expressions
✔ Subroutines

The following features are not supported:

❌ Text Segment Boundaries
❌ Negated Posix Character Classes
❌ Character Class Nested Set
❌ Character Class Intersection
❌ Character Class Union
❌ Character Class Subtraction
❌ Character Class Symmetric Difference
❌ Character Class Complement
❌ Line Comments
❌ Callouts
❌ Backtracking Control Verbs

Feature: Flags

^{Main article} ^| ^Reference ^| ^{Back to top} ^| ^{Improve this section: 1, 2}

Flags control certain aspects of the matching behavior of a pattern.

Syntax

^{Improve this section}

The following flags are supported:

i — Ignore Case. Matches character classes using a case-insensitive comparison.
m — Multiline. Causes the anchors ^ and $ to match the start and end of each line (respectively), rather than the start and end of the input.
s — Singleline. Causes the wildcard . to match newline characters.
x — Extended Mode. Ignores whitespace in a pattern. Spaces must instead be represented by \s or \ (an escaped space).

Feature: Anchors

^{Main article} ^| ^Reference ^| ^{Back to top} ^| ^{Improve this section: 1, 2}

Anchors match the start or end of a line.

Syntax

^{Improve this section}

^ — Matches the start of a line when the m (multiline) flag is set. Otherwise, matches the start of the input.
$ — Matches the end of a line when the m (multiline) flag is set. Otherwise, matches the end of the input.

Feature: Buffer Boundaries

^{Main article} ^| ^Reference ^| ^{Back to top} ^| ^{Improve this section: 1, 2}

A Buffer Boundary is an Atom that matches the start or the end of the input. This differs slightly from ^ and $ which can be affected by RegExp flags like m.

Syntax

^{Improve this section}

\` — Matches the start of the input.
\' — Matches the end of the input.
\A — Matches the start of the input.
\z — Matches the end of the input.
\Z — A zero-width assertion consisting of an optional sequence of newlines at the end of the buffer. Equivalent to (?=\n*\z).

Feature: Word Boundaries

^{Main article} ^| ^Reference ^| ^{Back to top} ^| ^{Improve this section: 1, 2}

A Word Boundary is an Atom that matches the start or the end of a word.

Syntax

^{Improve this section}

\` — Matches the start of the input.
\' — Matches the end of the input.
\A — Matches the start of the input.
\z — Matches the end of the input.
\Z — A zero-width assertion consisting of an optional sequence of newlines at the end of the buffer. Equivalent to (?=\n*\z).

Feature: Text Segment Boundaries

^{Main article} ^| ^{Back to top} ^| ^{Improve this section: 1, 2}

Feature: Continuation Escape

^{Main article} ^| ^Reference ^| ^{Back to top} ^| ^{Improve this section: 1, 2}

A Continuation Escape is a zero-width assertion that matches either the start of the input or the start of the last match.

Syntax

^{Improve this section}

\G — Matches either the start of the input or the start of the last match.

Feature: Alternatives

^{Main article} ^| ^Reference ^| ^{Back to top} ^| ^{Improve this section: 1, 2}

An Alternative represents two or more branches in a pattern. If first branch of a pattern fails to match, each alternative is attempted from left to right until a match is found.

Syntax

^{Improve this section}

| — Matches the pattern to the left of the |. If that fails, matches the pattern to the right of |.

Feature: Wildcard

^{Main article} ^| ^Reference ^| ^{Back to top} ^| ^{Improve this section: 1, 2}

A Wildcard matches a single, non-newline character.

Syntax

^{Improve this section}

. — Matches any character except newline characters. If the s (single-line) flag is set then this matches any character.

Feature: Character Classes

^{Main article} ^| ^Reference ^| ^{Back to top} ^| ^{Improve this section: 1, 2}

A Character Class is an Atom that specifies a set of characters to match a single character in the set.

Syntax

^{Improve this section}

[…] — Where … is one or more single characters or character class escapes, excluding ^ at the start and - between two entries in the set. Matches a character in the set. Example: [abc] matches a, b, or c.
[^…] — Where … is one or more single characters or character class escapes, excluding - between two entries in the set. Matches any character not in the set. Example: [^abc] matches d, e, or f, etc., but not a, b, or c.
[a-z] — Where a and z are single characters or character escapes. Matches any character in the range between a and z (inclusive). Example: [a-c] matches a, b, or c, but not d.

Feature: Posix Character Classes

^{Main article} ^| ^Reference ^| ^{Back to top} ^| ^{Improve this section: 1, 2}

A Posix Character Class is a member of a Character Class set that specifies a named, pre-defined set of characters.

Syntax

^{Improve this section}

[[:name:]] — Where name is in a set of predefined names. Matches any character in the set.

Feature: Negated Posix Character Classes

^{Main article} ^| ^{Back to top} ^| ^{Improve this section: 1, 2}

Feature: Collating Elements

^{Main article} ^| ^Reference ^| ^{Back to top} ^| ^{Improve this section: 1, 2}

A Collating Element is one or more characters that collate as a single unit.

Syntax

^{Improve this section}

[[.col.]] — Matches the collating element col if col is treated as a single collating unit in the current locale. Example: [[.ae.]-c] matches a single character in the range “ae”-“c”. col may also be specified by a symbolic name.

Feature: Equivalence Classes

^{Main article} ^| ^Reference ^| ^{Back to top} ^| ^{Improve this section: 1, 2}

An Equivalence Class matches any character or collating element with the same primary sort key as the provided collating element.

Syntax

^{Improve this section}

[[=col=]] — Matches any character with the same primary sort key as col. Example: [[=a=]] matches a, À, Á, Â, Ã, Ä, Å, A, à, á, â, etc.

Feature: Character Class Escapes

^{Main article} ^| ^Reference ^| ^{Back to top} ^| ^{Improve this section: 1, 2}

A Character Class Escape is a single character escape that represents an entire character class. They can be used as an element of a Character Class or as an Atom. It is often the case that a lower-case escape character is the inclusive set, while an upper-case variant of the same character excludes that set.

Syntax

^{Improve this section}

\d — A decimal digit character in the range 0-9. Equivalent to [0-9].
\D — Any character not in the range 0-9. Equivalent to [^0-9].
\w — Any “word” character. Equivalent to [a-zA-Z0-9_].
\W — Any non-“word” character. Equivalent to [^a-zA-Z0-9_].
\s — Any whitespace character.
\S — Any non-whitespace character.
\l — Any lower-case character.
\L — Any non-lower-case character.
\u — Any upper-case character.
\U — Any non-upper-case character.
\h — Any horizontal whitespace character.
\H — Any non-horizontal whitespace character.
\v — Any vertical whitespace character.
\V — Any non-vertical whitespace character.

Feature: Line Endings Escape

^{Main article} ^| ^Reference ^| ^{Back to top} ^| ^{Improve this section: 1, 2}

A Line Endings Escape is an Atom that matches any line ending character sequence.

Syntax

^{Improve this section}

\R — Equivalent to (?>\r\n?|[\x0A-\x0C\x85\u{2028}\u{2029}])

Feature: Character Property Escapes

^{Main article} ^| ^Reference ^| ^{Back to top} ^| ^{Improve this section: 1, 2}

A Character Property Escape is an escape sequence used to match a character with a specific character property.

Syntax

^{Improve this section}

\pX — Where X is a single character. Matches a character that has the property X.
\p{name} — Where name is a predefined property name. Matches a character that has the property name.
\PX — Where X is a single character. Matches a character that does not have the property X.
\P{name} — Where name is a predefined property name. Matches a character that does not have the property name.

Feature: Character Class Nested Set

^{Main article} ^| ^{Back to top} ^| ^{Improve this section: 1, 2}

Feature: Character Class Intersection

^{Main article} ^| ^{Back to top} ^| ^{Improve this section: 1, 2}

Feature: Character Class Union

^{Main article} ^| ^{Back to top} ^| ^{Improve this section: 1, 2}

Feature: Character Class Subtraction

^{Main article} ^| ^{Back to top} ^| ^{Improve this section: 1, 2}

Feature: Character Class Symmetric Difference

^{Main article} ^| ^{Back to top} ^| ^{Improve this section: 1, 2}

Feature: Character Class Complement

^{Main article} ^| ^{Back to top} ^| ^{Improve this section: 1, 2}

Feature: Quoted Characters

^{Main article} ^| ^Reference ^| ^{Back to top} ^| ^{Improve this section: 1, 2}

Quoted Characters are a sequence of characters treated as literal characters rather than RegExp characters.

Syntax

^{Improve this section}

\Q…\E — All characters following \Q and preceding the next \E are treated as literal characters. Example: \Q.+\E matches .+ but not aa.
\Q… — If there is no trailing \E, all characters until the end of the pattern are treated as literal characters.

Feature: Quantifiers

^{Main article} ^| ^Reference ^| ^{Back to top} ^| ^{Improve this section: 1, 2}

Quantifiers specify repetition of an Atom. By default, quantifiers are “greedy” in that they attempt to match as many instances of the preceding Atom as possible to satisfy the pattern before backtracking.

Syntax

^{Improve this section}

* — Matches the preceding Atom zero or more times. Example: a*b matches b, ab, aab, aaab, etc.
+ — Matches the preceding Atom one or more times. Example: a+b matches ab, aab, aaab, etc., but not b.
? — Matches the preceding Atom zero or one times. Example: a?b matches b, ab.
{n} — Where n is an integer. Matches the preceding Atom exactly n times. Example: a{2} matches aa but not a or aaa.
{n,} — Where n is an integer. Matches the preceding Atom at-least n times. Example: a{2,} matches aa, aaa, aaaa, etc., but not a.
{n,m} — Where n and m are integers, and m >= n. Matches the preceding Atom at-least n times and at-most m times. Example: a{2,3} matches aa, aaa, aaaa, etc., but not a or aaaa.

Feature: Lazy Quantifiers

^{Main article} ^| ^Reference ^| ^{Back to top} ^| ^{Improve this section: 1, 2}

Lazy Quantifiers specify repetition of an Atom, but attempt to match as few instances of the preceding Atom as possible to satisfy the pattern before advancing.

Syntax

^{Improve this section}

*? — Matches the preceding Atom zero or more times.
+? — Matches the preceding Atom one or more times.
?? — Matches the preceding Atom zero or one times.
{n}? — Where n is an integer. Matches the preceding Atom exactly n times.
{n,}? — Where n is an integer. Matches the preceding Atom at-least n times.
{n,m}? — Where n and m are integers, and m >= n. Matches the preceding Atom at-least n times and at-most m times.

Feature: Possessive Quantifiers

^{Main article} ^| ^Reference ^| ^{Back to top} ^| ^{Improve this section: 1, 2}

Possessive Quantifiers are like greedy (i.e., regular) quantifiers, except that backtracking is not performed.

Syntax

^{Improve this section}

*+ — Match zero or more characters without backtracking.
++ — Match one or more characters without backtracking.
?+ — Match zero or one characters without backtracking.
{n,}+ — Where n is an integer. Matches the preceding Atom at-least n times without backtracking.
{n,m}+ — Where n and m are integers, and m >= n. Matches the preceding Atom at-least n times and at-most m times without backtracking.

Feature: Capturing Groups

^{Main article} ^| ^Reference ^| ^{Back to top} ^| ^{Improve this section: 1, 2}

A Capturing Group is a subexpression that can be treated as an Atom and can be repeated using Quantifiers and referenced using Backreferences by index. A Capturing Group can be captured and returned by the matching algorithm.

Syntax

^{Improve this section}

(…) — Groups the subexpression as a single Atom. The result is captured and returned by the matching algorithm.

Feature: Named Capturing Groups

^{Main article} ^| ^Reference ^| ^{Back to top} ^| ^{Improve this section: 1, 2}

A Named Capturing Group is a subexpression that can be captured and returned by the matching algorithm. A Named Capturing Group is also an Atom and can be repeated using Quantifiers and referenced using Backreferences by name.

Syntax

^{Improve this section}

(?<name>…) — Groups the subexpression as a single Atom associated with the provided name. The result is captured and returned by the matching algorithm.
(?'name'…) — Groups the subexpression as a single Atom associated with the provided name. The result is captured and returned by the matching algorithm.

Feature: Non-Capturing Groups

^{Main article} ^| ^Reference ^| ^{Back to top} ^| ^{Improve this section: 1, 2}

A Non-capturing Group is a subexpression that can be treated as an Atom and can be repeated using Quantifiers but cannot be referenced using Backreferences. A Non-capturing Group is not captured by the matching algorithm.

Syntax

^{Improve this section}

(?:…) — Groups the subexpression as a single Atom.

Feature: Backreferences

^{Main article} ^| ^Reference ^| ^{Back to top} ^| ^{Improve this section: 1, 2}

Backreferences allow a pattern to re-match a previously matched capture group^{1 2} either by number (n) or by name.

Syntax

^{Improve this section}

\n — Where n is in the range 1-9. Matches the same string as the capture group n.
\gn — Where n is in the range 1-9. Matches the same string as the capture group n.
\g-n — Where n is in the range 1-9. Matches the nth previous capture group.
\g{n} — Where n is an integer >= 0. Matches the same string as the capture group n.
\g{-n} — Where n is an integer >= 0. Matches the nth previous capture group.
\g{name} — Matches the named capture group with the name name.
\k<name> — Matches the named capture group with the name name.

Feature: Comments

^{Main article} ^| ^Reference ^| ^{Back to top} ^| ^{Improve this section: 1, 2}

A Comment is a sequence of characters that is ignored by pattern matching and can be used to document a pattern.

Syntax

^{Improve this section}

(?#…) — The entire expression is removed from the pattern. A comment may not contain other ( or ) characters.

Feature: Line Comments

^{Main article} ^| ^{Back to top} ^| ^{Improve this section: 1, 2}

Feature: Modifiers

^{Main article} ^| ^Reference ^| ^{Back to top} ^| ^{Improve this section: 1, 2}

Modifiers allow you to change the currently active RegExp flags within a subexpression.

Syntax

^{Improve this section}

(?imsx-imsx) - Sets or unsets (using -) the specified RegExp flags starting at the current position until the next closing ) or the end of the pattern. Example: (?-i)A(?i)B(?-i)C matches ABC, AbC.
(?imsx-imsx:…) - Sets or unsets (using -) the specified RegExp flags for the subexpression. Example: (?-i:A(?i:B)C) matches ABC, AbC.

Feature: Branch Reset

^{Main article} ^| ^Reference ^| ^{Back to top} ^| ^{Improve this section: 1, 2}

A Branch Reset resets the subexpression count at the start of each Alternative (|), which affects numbering for Backreferences and captured results returned from the matching algorithm.

Syntax

^{Improve this section}

(?|…) — Resets the subexpression count at the start of each Alternative.

Feature: Lookahead

^{Main article} ^| ^Reference ^| ^{Back to top} ^| ^{Improve this section: 1, 2}

A Lookahead is a zero-width assertion that matches if the provided pattern would match the characters to the right of the current position.

Syntax

^{Improve this section}

(?=…) — Positive Lookahead. Matches if the provided pattern would match but does not advance the current position.
(?!…) — Negative Lookahead. Matches if the provided pattern would not match, but does not advance the current position.

Feature: Lookbehind

^{Main article} ^| ^Reference ^| ^{Back to top} ^| ^{Improve this section: 1, 2}

A Lookbehind is a zero-width assertion that matches if the provided pattern would match the characters to the left of the current position.

Syntax

^{Improve this section}

(?<=…) — Positive Lookbehind. Matches if the provided pattern would match the preceding characters, but does not advance the current position. The pattern must have a fixed length (unbounded quantifiers are not permitted).
(?<!…) — Negative Lookbehind. Matches if the provided pattern would not match the preceding characters, but does not advance the current position. The pattern must have a fixed length (unbounded quantifiers are not permitted).

Feature: Non-Backtracking Expressions

^{Main article} ^| ^Reference ^| ^{Back to top} ^| ^{Improve this section: 1, 2}

A Non-Backtracking Expression is matched independent of neighboring patterns, and will not backtrack in the event of a failed match. This is often used to improve performance.

Syntax

^{Improve this section}

(?>…) — Matches the provided pattern, but no backtracking is performed if the match fails.

Feature: Recursion

^{Main article} ^| ^Reference ^| ^{Back to top} ^| ^{Improve this section: 1, 2}

A Recursive Expression provides a mechanism for re-evaluating a capture group inside of itself, to handle cases such as matching balanced parenthesis or brackets, etc.

Syntax

^{Improve this section}

(?R) — Reevaluates the entire pattern starting at the current position.
(?0) — Reevaluates the entire pattern starting at the current position.
(?n) — Where n is an integer >= 1. Re-evaluates the capture group whose offset is n.
(?-n) — Where n is an integer >= 1. Re-evaluates the capture group whose offset is the nth capture group declared to the left of the current Atom. Example: (?-1) would revaluate the last declared capture group.
(?+n) — Where n is an integer >= 1. Re-evaluates the capture group whose offset is the nth capture group declared to the right of the current Atom. Example: (?+1) would evaluate the next declared capture group.
(?&name) — Re-evaluates the named capture group with the provided name.

Feature: Conditional Expressions

^{Main article} ^| ^Reference ^| ^{Back to top} ^| ^{Improve this section: 1, 2}

A Conditional Expression checks a condition and evaluates its first alternative if the condition is true; otherwise, it evaluates its second alternative.

Syntax

^{Improve this section}

(?(condition)yes-pattern|no-pattern) — Matches yes-pattern if condition is true; otherwise, matches no-pattern.
(?(condition)yes-pattern) — Matches yes-pattern if condition is true; otherwise, matches the empty string.

Conditions

The following conditions are supported:

(?(?=test-pattern)…) — Evaluates to true if a lookahead for test-pattern matches; Otherwise, evaluates to false.
(?(?!test-pattern)…) — Evaluates to true if a negative lookahead for test-pattern matches; Otherwise, evaluates to false.
(?(n)…) — Evaluates to true if the capture group at offset n was successfully matched; Otherwise, evaluates to false.
(?(<name>)…) — Evaluates to true if the named capture group with the name name was successfully matched; Otherwise, evaluates to false.
(?('name')…) — Evaluates to true if the named capture group with the name name was successfully matched; Otherwise, evaluates to false.
(?(R)…) — Evaluates to true if inside a recursive expression; Otherwise, evaluates to false.
(?(Rn)…) — Evaluates to true if inside a recursive expression for the capture group at offset n; Otherwise, evaluates to false.
(?(R&name)…) — Evaluates to true if inside a recursive expression for the named capture group with the name name; Otherwise, evaluates to false.
(?(DEFINE)…) — Always evaluates to false. This allows you to define Subroutines.

Feature: Subroutines

^{Main article} ^| ^Reference ^| ^{Back to top} ^| ^{Improve this section: 1, 2}

A Subroutine is a pre-defined capture group or named capture group that can be reused in multiple places within the pattern to re-evaluate the subexpression from the group.

Syntax

^{Improve this section}

(?(DEFINE)…) — Defines a set of reusable capture groups that can be referenced elsewhere in the pattern.
(?n) — Where n is an integer >= 1. Evaluates the capture group whose offset is n.
(?-n) — Where n is an integer >= 1. Evaluates the capture group whose offset is the nth capture group declared to the left of the current Atom. Example: (?-1) would revaluate the last declared capture group.
(?+n) — Where n is an integer >= 1. Evaluates the capture group whose offset is the nth capture group declared to the right of the current Atom. Example: (?+1) would evaluate the next declared capture group.
(?&name) — Evaluates the named capture group with the provided name.

Example

^{Improve this section}

(?(DEFINE)
  (?<Year>\d{4}|[+-]\d{5,})
  (?<Month>0[1-9]|1[0-2])
  (?<Day>0[1-9]|2[0-9]|3[01])
)
(?<Date>(?&Year)-(?&Month)-(?&Day)|(?&Year)(?&Month)(?&Day))

Feature: Callouts

^{Main article} ^| ^{Back to top} ^| ^{Improve this section: 1, 2}

Feature: Backtracking Control Verbs

^{Main article} ^| ^{Back to top} ^| ^{Improve this section: 1, 2}

Engine: Boost.Regex

Languages

Features

Feature: Flags

Syntax

See Also

Feature: Anchors

Syntax

See Also

Feature: Buffer Boundaries

Syntax

See Also

Feature: Word Boundaries

Syntax

See Also

Feature: Text Segment Boundaries

See Also

Feature: Continuation Escape

Syntax

See Also

Feature: Alternatives

Syntax

Feature: Wildcard

Syntax

Feature: Character Classes

Syntax

See Also

Feature: Posix Character Classes

Syntax

See Also

Feature: Negated Posix Character Classes

See Also

Feature: Collating Elements

Syntax

See Also

Feature: Equivalence Classes

Syntax

See Also

Feature: Character Class Escapes

Syntax

See Also

Feature: Line Endings Escape

Syntax

See Also

Feature: Character Property Escapes

Syntax

See Also

Feature: Character Class Nested Set

See Also

Feature: Character Class Intersection

See Also

Feature: Character Class Union

See Also

Feature: Character Class Subtraction

See Also

Feature: Character Class Symmetric Difference

See Also

Feature: Character Class Complement

See Also

Feature: Quoted Characters

Syntax

Feature: Quantifiers

Syntax

See Also

Feature: Lazy Quantifiers

Syntax

See Also

Feature: Possessive Quantifiers

Syntax

See Also

Feature: Capturing Groups

Syntax

See Also

Feature: Named Capturing Groups

Syntax

See Also

Feature: Non-Capturing Groups

Syntax

See Also

Feature: Backreferences